Journal search

Search in this title:

Aircraft Engineering and Aerospace Technology

ISSN: 0002-2667

Online from: 1929

Subject Area: Mechanical & Materials Engineering

Content: Latest Issue | Latest Issue RSS | Previous Issues

Options: To add Favourites and Table of Contents Alerts please take a Emerald profile

References for:
Ceramic engine considerations for future aerospace propulsion

There are 65 references for this article:

1. Ameyugo, G. (2007) "Distributed propulsion and future aerospace technologies",
   Options: Order form  |  Infotrieve
   
2. Barsoum, M. (2003) Fundamentals of Ceramics,
   Options: Order form  |  Crossref  |  Infotrieve
   
3. Bevilaqua, P. (2003) "Future application of the JSF variable cycle",
   Options: Order form  |  Infotrieve
   
4. Board, N.M.A. (1987) "Ceramic technology for advanced heat engines",
   Options: Order form  |  Infotrieve
   
5. Bove, R., Lunghi, P. (2006) "Electric power generation from landfill gas using traditional and innovative technologies",
   Options: Order form  |  Infotrieve
   
6. Buerge, B. (2010) "The suitability of hybrid vs. conventional airships for persistent surveillance missions",
   Options: Order form  |  Infotrieve
   
7. Bunk, W., Hausner, H. (1986) "Ceramics materials and components for engines", Proceedings of the Second International Symposium, Lubeck-Travemunde, Germany, 14-17 April,
   Options: Order form  |  Infotrieve
   
8. Callaghan, J.T., Liebeck, R.H. (1990) "Some thoughts on the design of subsonic transport aircraft for the 21st century",
   Options: Order form  |  Infotrieve
   
9. Carter, B.C., Norton, M.G. (2007) Ceramic Materials: Science and Engineering,
   Options: Order form  |  Infotrieve
   
10. Chan, N.Y.S. (2008) "Scaling considerations for small aircraft engines",
    Options: Order form  |  Infotrieve
    
11. Clark, I.K. (2005) "Limited life engines for UAVs", The Aeronautical Journal, Vol.109 No.1095
    Options: Order form  |  Infotrieve
    
12. Coleman, T. (1988) Jack Northrop and the Flying Wing: The Real Story Behind the Stealth Bomber,
    Options: Order form  |  Infotrieve
    
13. Colozza, A. (2003) "PV/Regenerative fuel cell high altitude airship feasibility study",
    Options: Order form  |  Infotrieve
    
14. Cumpsty, N. (2003) Jet Propulsion: A Simple Guide to the Aerodynamics and Thermodynamic Design and Performance of Jet Engines,
    Options: Order form  |  Infotrieve
    
15. Demidov, S., Bonnet, J. (2009) Traffic Related Air Pollution and Internal Combustion Engines (Air, Water and Soil Science and Technology),
    Options: Order form  |  Infotrieve
    
16. Dorrington, G.E. (2005) "Development of an airship for tropical rain forest canopy exploration", The Aeronautical Journal, Vol.109 No.1098
    Options: Order form  |  Infotrieve
    
17. Dorrington, G.E. (2004) "Performance of non-rigid airships operating in the neutral buoyancy condition", The Aeronautical Journal, Vol.111 No.1116
    Options: Order form  |  Infotrieve
    
18. Dworak, W., Fingerle, D. (1987) "Ceramic materials for engines", Journal of Materials Science, Vol.86 pp170-80
    Options: Order form  |  Infotrieve
    
19. Esler, D. (2010) "How UAVs will change aviation", Aviation Week,
    Options: Order form  |  Infotrieve
    
20. Feigenbaum, D. (1945) "Estimation of the performance and longitudinal stability and control of a lifting-body type of cargo airplane from tests of simplified models",
    Options: Order form  |  Infotrieve
    
21. Felder, J., Kim, H.D., Brown, G. (2009) "Turboelectric distributed propulsion engine cycle analysis for hybrid-wing-body aircraft",
    Options: Order form  |  Infotrieve
    
22. Folks, J. (2008) "Balloons airships and kites lighter than air past, present and future", The Aeronautical Journal, Vol.112 No.1133
    Options: Order form  |  Infotrieve
    
23. GE-Rolls Royce Fighter Engine Team (2009) "F-136 component responsibility",
    Options: Order form  |  Infotrieve
    
24. Gibson, A., Hall, D., Waters, M., Masson, P., Schiltgen, B., Foster, T. (2010) "The potential and challenge of turboelectric propulsion for subsonic transport aircraft",
    Options: Order form  |  Infotrieve
    
25. Gohardani, A.S., Doulgeris, G., Singh, R. (2011a) "Challenges of future aircraft propulsion: a review of distributed propulsion technology and its potential application for the all electric commercial aircraft", Progress in Aerospace Sciences, Vol.47 No.5 pp369-91
    Options: Order form  |  Crossref  |  Infotrieve
    
26. Gohardani, A.S., Edwards, H., Doulgeris, G., Singh, R. (2011b) "ELECTERA – a step towards the development of a techno economic risk analysis scheme for future electric aircraft", ISABE 2011 Proceedings, American Institute of Aeronautics and Astronautics, ISABE-2011-1407,
    Options: Order form  |  Infotrieve
    
27. Gohardani, O. (2011) "Impact of erosion testing aspects on current and future flight conditions", Progress in Aerospace Sciences, Vol.47 No.4 pp280-303
    Options: Order form  |  Crossref  |  Infotrieve
    
28. Howe, D. (1971) "The feasibility of large freight airship",
    Options: Order form  |  Infotrieve
    
29. Jacobs, E.N., Sherman, A. (1937) "Wing-fuselage interference – comparison of conventional and airfoil-type-fuselage combinations",
    Options: Order form  |  Infotrieve
    
30. Jones, S.M., Welch, G.E. (1996) "Performance benefits for wave rotor-topped gas turbine engines",
    Options: Order form  |  Infotrieve
    
31. Kawamura, H., Isuzu Motors Limited (1991) "Ceramic engine",
    Options: Order form  |  Infotrieve
    
32. Liebeck, R.H., Page, M.A., Rawdon, B.K., Scott, P.W., Wright, R.A. (1994) "Concepts for advanced subsonic transports",
    Options: Order form  |  Infotrieve
    
33. Liu, T., Liou, W. (2006) "Aeroship: a new flight platform",
    Options: Order form  |  Infotrieve
    
34. Lovatt, A., Shercliff, H., Withers, P. (2009) "Aero-engines: hotter, stiffer, stronger, lighter where does the aero-engine go next?",
    Options: Order form  |  Infotrieve
    
35. Luffman, C. (2007) "Lighter-than-air (LTA) aircraft undercarriages: the author's experience",
    Options: Order form  |  Infotrieve
    
36. Malcolm, J.S., Aleiferis, P.G., Todd, A.R., Cairns, A., Hume, A., Blaxill, H., Hoffmann, H., Rueckauf, J. (2007) "A study of alcohol blended fuels in a new optical spark-ignition engine", Internal Combustion Engines: Performance, Fuel Economy and Emissions, pp223-34
    Options: Order form  |  Infotrieve
    
37. McDonald, C.F. (2000) "Low-cost compact primary focus recuperator concept for microturbines", Applied Thermal Engineering, Vol.10 pp471-97
    Options: Order form  |  Crossref  |  Infotrieve
    
38. McLean, A.F., Fisher, E.A. (1976) "Brittle materials design – high temperature gas turbine",
    Options: Order form  |  Infotrieve
    
39. Miller, G., Stoia, T., Harmala, D., Atreya, S. (2005) "Operational capability of high altitude solar powered airships",
    Options: Order form  |  Infotrieve
    
40. Mohitpour, M., Botros, K.K., Van Hardeveld, T. (2008) Pipeline Pumping and Compression Systems: A Practical Approach,
    Options: Order form  |  Infotrieve
    
41. Naber, J.D., Worm, J.J. (2009) Application of Biomassderived Fuels for Internal Combustion Engines with a Focus on Transportation, Renewable Energy From Forest Resources in the United States,
    Options: Order form  |  Infotrieve
    
42. NASA (2008) "Turbine blade alloys",
    Options: Order form  |  Infotrieve
    
43. Nayler, A.W.L. (2001) "Airship development world-wide – a 2001 review",
    Options: Order form  |  Infotrieve
    
44. Newcome, L.R. (2006) "Impact of solar storms on high altitude long endurance aircraft and airship designs and operations", The Aeronautical Journal, Vol.110 No.1111
    Options: Order form  |  Infotrieve
    
45. Popular Science (2002) Vol.261 No.2 pp62-6
    Options: Order form  |  Infotrieve
    
46. Reed, D.B. (1997) "Wingless flight: the lifting body story",
    Options: Order form  |  Infotrieve
    
47. Roman, D., Alien, J.B., Liebeck, R.H. (2000) "Aerodynamic design challenges of the blended-wing-body subsonic transport", 18th AIAA Applied Aerodynamics Conference, Denver, Colorado, 14-17 August 2000, pp618-27
    Options: Order form  |  Infotrieve
    
48. Schaefer, I. (2002) "Airships as unmanned platforms: challenge and chance",
    Options: Order form  |  Infotrieve
    
49. Schonborn, A., Ladommatos, N., Williams, J., Allan, R., Rogerson, J. (2007) "Effects on diesel combustion of the molecular structure of potential synthetic bio-fuel molecules",
    Options: Order form  |  Infotrieve
    
50. Sehra, A.K., Whitlow, W. Jr (2004) "Propulsion and power for 21st century aviation", Progress in Aerospace Sciences, Vol.40 No.4/5 pp199-235
    Options: Order form  |  Infotrieve
    
51. Severns, C. (2007) "Airship hybrid power system design using evolutionary programming for seeking neutral buoyancy",
    Options: Order form  |  Infotrieve
    
52. Snodgrass, J. (2007) "Up, up and away: airships, the next generation", CNN News Article,
    Options: Order form  |  Infotrieve
    
53. Taylor, A.M.K. (2008) "Science review of internal combustion engines", Energy Policy, Vol.36 No.12
    Options: Order form  |  Infotrieve
    
54. Taylor, C.F. (1985) Internal Combustion Engine in Theory and Practice,
    Options: Order form  |  Infotrieve
    
55. Tetsuo, T. (1999) "Component development for 300?kW class industrial ceramic gas turbine. Development of the 300?kW recuperated 2-shaft ceramic gas turbine for co-generation-design concepts and requirements for ceramics", Ceramics Japan, Vol.34 No.12 pp990-4
    Options: Order form  |  Infotrieve
    
56. Thouault, N., Breitsamter, C., Adams, N.A., Gologan, C., Seifert, J. (2009) "Experimental investigation of the aerodynamic characteristics of generic fan-in-wing configurations", The Aeronautical Journal, Vol.113 No.1139
    Options: Order form  |  Infotrieve
    
57. van Blarigan, P. (1998) "Advanced hydrogen fuelled internal combustion engines", Energy Fuels, Vol.12 No.1
    Options: Order form  |  Crossref  |  Infotrieve
    
58. van Treuren, R.G. (2003) "The hydrogen ballonet",
    Options: Order form  |  Infotrieve
    
59. Wang, Q., Chen, J., Fu, G., Duan, D., Zhao, H. (2009) "A methodology for optimisation design and analysis of stratosphere airship", The Aeronautical Journal, Vol.113 No.1146
    Options: Order form  |  Infotrieve
    
60. Wilson, J., Paxson, D.E. (1993) "Jet engine performance enhancement through the use of a wave-rotor topping cycle",
    Options: Order form  |  Infotrieve
    
61. Wood, R.M., Bauer, X.S. (2001) "Flying wings/flying fuselages",
    Options: Order form  |  Infotrieve
    
62. Wright, L.M., Gohardani, A.S. (2008a) "Effect of coolant ejection in rectangular and trapezoidal trailing-edge cooling passages", ASME Conference Proceedings, pp399
    Options: Order form  |  Infotrieve
    
63. Wright, L.M., Gohardani, A.S. (2008b) "Effect of turbulator width and spacing on the thermal performance of angled ribs in a rectangular channel (AR=3:1)", ASME Conference Proceedings, pp1103
    Options: Order form  |  Infotrieve
    
64. Wright, L.M., Gohardani, A.S. (2009) "Effect of coolant ejection in rectangular and trapezoidal trailing-edge cooling passages", AIAA Journal of Thermophysics and Heat Transfer, Vol.23 No.2
    Options: Order form  |  Infotrieve
    
65. Yan, D.S., Fu, X.R., Shi, S.X. (1994) "Ceramic materials and components for engines", Proceedings of the 5th International Symposium, 28 December,
    Options: Order form  |  Infotrieve